DMR+ IPSC2

DMRplus IPSC2 Options Generator. © MOVUB & K6JWN 2022. Version 1.02.                            Before you start, check out your local IPSC2 server to see which Talkgroups are assigned to which slot.                   Proceed by entering the Talkgroups you wish to book as a STATIC talkgroup from the IPSC2 server.                   *ANY* Talkgroup on *BOTH* slots can be booked by a Simplex Hotspot or Repeater! But you must include this in the string on your device!                   You can enable TS1 in this tool for use on a Simplex Hotspot or Repeater.                   In addition you can enter configuration for a single DMRplus Reflector too!                   For more information on options and what they are for please visit the website here!


Options Generator | DMRplus+

This tool is used to generate the DMR+ "OPTIONS STRING" needed for the options field in your MMDVM / PiStar DMR configuration.
e.g Static Talkgroups, Startup Reflectors and Configuration in Pi-Star / MMDVM / DMRGateway.

For information about what DMRplus OPTIONS Click Here!


Duplex Hotspots / Repeaters can book STATIC Talkgroups from TS1 and/or TS2 as desired.

Simplex Hotspots can book STATIC Talkgroups from either TS1 and/or TS2 by enabling the TS1 & TS2 Enable button below.


Enter the Talkgroups and Parameters you want to set in DMRplus options in the table below.

Click "GENERATE OPTIONS" below.

TS1 & TS2 Enable: TS2 Only:

STATIC TALKGROUPS (TS1)
STATIC TALKGROUPS (TS2)
  Static TG 1 (leave 0 for none):   Static TG 1 (leave 0 for none):
  Static TG 2 (leave 0 for none):   Static TG 2 (leave 0 for none):
  Static TG 3 (leave 0 for none):   Static TG 3 (leave 0 for none):
  Static TG 4 (leave 0 for none):   Static TG 4 (leave 0 for none):
  Static TG 5 (leave 0 for none):   Static TG 5 (leave 0 for none):
  Static TG 6 (leave 0 for none):   Static TG 6 (leave 0 for none):
  Static TG 7 (leave 0 for none):   Static TG 7 (leave 0 for none):
  Static TG 8 (leave 0 for none):   Static TG 8 (leave 0 for none):
  Static TG 9 (leave 0 for none):   Static TG 9 (leave 0 for none):

Reflectors | DMRplus+

  Start on Reflector    4000 = none  
  Relink Time    time (in mins)  
  UserLink    0 or 1  
  CQWW    0 or 1  







( Copy & paste the entire STRING in GREEN into the "Options=" or "Options:" field in your MMDVM / PiStar device )

** For DMRGateway: copy & paste, starting with "Options=...."


DMR+ Options Generator Ver: OPG1.02 Shane Daley M0VUB. 2022 ©
IPSC2 Development by OE1KBC © Ing. Kurt Baumann
Options PHP Codebase © Jim Nessen
Design by © IPSC2-FreeSTAR
DMRplus+